4506 has in its interface vlan 1 the IP address 192.168.10.1/16 this is the default gateway of the network. I'm usin vlan 3 as the administrative vlan for the other switches, the addressing for that vlan is 10.X.X.X/24, I have a DHCP server with IP address 192.168.10.12 which is the FW of the network for internet. the problem is, when a pc sends an IP address request it gets an IP address 192.168.1.221/16 but this pc can't ping 192.168.10.1 nor 192.168.10.12 nor 192.168.10.5 (dns) the computer has no access to internet, it can ping a public dns though. The PC can telnet 4506 switch through the 10.X.X.X interface and also can ping the 4506 in the other interfaces (voice vlan for example). When I set the network mask to 24 bits instead of 16 everything work just fine. I tried to connect the pc in other switch (2960) and the behavior was the same. The other PCs have no problem with a 16 bits networmask.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.