Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Adjust 3750x Stackpower Budget?

Hi All,

Im recieving a weird stackpower warning out of my 3750x stack and cant find the commands to resolve it.  The error is:

%PLATFORM_STACKPOWER-4-UNDER_BUDGET: Switch 2 does not have sufficient power budget

The stack is 2x 3750x-48TS switches with 3x 350w PS installed:

--

SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts

--  ------------------  ----------  ---------------  -------  -------  -----

1A  C3KX-PWR-350WAC    ````  OK              Good     Good     350/0

1B  C3KX-PWR-350WAC    ````  OK              Good     Good     350/0

2A  C3KX-PWR-350WAC     ````  OK              Good     Good     350/0

2B  Not Present

I ran the power calculations and I should be more than fine for total stack power, but the power budget seems low on Switch 2 which looks like the root of the problem:

--

Power stack name: Powerstack-1

    Stack mode: Power sharing

    Stack topology: Ring

    Switch 1:

        Power budget: 223

        Low port priority value: 21

        High port priority value: 12

        Switch priority value: 3

        Port 1 status: Connected

        Port 2 status: Connected

        Neighbor on port 1: ```

        Neighbor on port 2: ```

    Switch 2:

        Power budget: 206

        Low port priority value: 22

        High port priority value: 13

        Switch priority value: 4

        Port 1 status: Connected

        Port 2 status: Connected

        Neighbor on port 1: ```

        Neighbor on port 2: ```

Any hints on how to change the power budget priority in the stack?

Everyone's tags (4)
1 REPLY
New Member

Adjust 3750x Stackpower Budget?

was this issue solved for you

and have you done any stack power configuration for this ?

837
Views
0
Helpful
1
Replies