I am have trouble with packets getting fragmented because of their size 1522 bytes. We have the "IP TCP MSS-ADJUST" command on the interface which is fine for TCP packets, but what can I do about UDP packets??
That is my assumption also. The MTU for the interface is 1500 and the "bytes on the wire is 1522" and they are being fragmented correctly. I was really try to figure out if I could do something with the UDP packets.
Thanks for your help, you basically answered my question.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...