Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ADSL config on Ethernet interface

Hi all

Our service provider is giving ADSL connection on Ethernet(RJ45(HWIC-1FE))interface on router side.Is the configuration on the router is same like ADSL ports(RJ11-ATM0/1/0)?.Please advise?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: ADSL config on Ethernet interface

Hello Anvar,

the configuration can be similar if using PPPoE:

the ethernet interface is configured to use the pppoe client feature that can use a dialer interface.

see

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080126dc0.shtml#configs

Note:

newer IOS images don't need to use the vpdn to be able to perform PPPoE client.

see for example for 12.4

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_client_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1053456

Hope to help

Giuseppe

1 REPLY
Hall of Fame Super Silver

Re: ADSL config on Ethernet interface

Hello Anvar,

the configuration can be similar if using PPPoE:

the ethernet interface is configured to use the pppoe client feature that can use a dialer interface.

see

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080126dc0.shtml#configs

Note:

newer IOS images don't need to use the vpdn to be able to perform PPPoE client.

see for example for 12.4

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_client_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1053456

Hope to help

Giuseppe

116
Views
0
Helpful
1
Replies