ADSL using ZTE modem and Cisco 1760 with Ethernet WIC

[super.anyak]

I have a ZTE modem from my ISP and a cisco 1760. The ISP uses PPPOE authentication. The ZTE 831 modem/router allows me to disable the routing functions by creating a "bridge". How can I configure my cisco router to use pppoe authentication on the WIC card so I have my public IP on the cisco instead of having it on the modem?

[thomas.chen]

The configuration for the 1700 will slightly differ depending on the WIC module you have:

PPPoE with WIC-1ADSL

http://www.cisco.com/warp/public/794/wicadsl_pppoe_client.html

PPPoE with WIC-1ENET

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093fbf.shtml