Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

advertising routes

Hi all, if i have a router with an interface on the 192.168.3.0/24 network and the other on a 10.118.200.0/24 network, but I route other 10.118.0.0 routes out of the 10.118.200.0/24 interface, how do I advertise the routes to that other network out the 192.168.3.0 interface? do I do a summary route, or redist static ?

2 REPLIES
Cisco Employee

Re: advertising routes

Carl,

Redistribute static should work just fine.

Regards,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: advertising routes

is this what I would normally do? could I also use a summary route covering the non directly connected networks, then once the traffic reaches my local router it would use the static route ?

107
Views
0
Helpful
2
Replies