Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

After IOS upgrade I get this FIPS error

FIPS: Flash Key Check : End, Not Found,FIPS Mode Not Enabled

I used this code:  cat3k_caa-universalk9.SPA.03.03.01.SE.150-1.EZ1.bin

What am Idoing wrong here? will this effect the switch?   I havent seen this error before and a google search isnt very helpfull.

Here is my sh ver before upgradeing IOS

Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIV
ERSALK9-M), Version 03.02.02.SE RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 14-Jun-13 19:24 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2013 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 1.2, RELEASE SOFTWARE
(P)

1 REPLY
Silver

After IOS upgrade I get this FIPS error

Hi,

Looks like this is not supported on that IOS XE version. See the release notes below:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html#wp57462

Hope this helps.

296
Views
0
Helpful
1
Replies
CreatePlease login to create content