Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

After upgrading our link form 1000Mbps to 1200 Mbps we are receiving this error. Interface goes to err-disabled state

053389: Aug  6 08:00:36.994 IST: %CONST_DIAG-SW1_SP-3-HM_PORT_TEST_FAIL: Switch 1 Module 4 TestPortTxMonitoring Port(s)[4] failed. System operation continues.

053390: Aug  6 08:00:37.574 IST: %HA_EM-6-LOG: Mandatory.go_porttx.tcl: GOLD EEM TCL policy for TestPortTxMonitoring

053391: Aug  6 08:00:37.362 IST: %PM-SW1_SP-4-ERR_DISABLE: diagnostics error detected on Te1/4/4, putting Te1/4/4 in err-disable state

053392: Aug  6 08:00:37.620 IST: %PM-SW2_SPSTBY-4-ERR_DISABLE: diagnostics error detected on Te1/4/4, putting Te1/4/4 in err-disable state

adadf#                    show interfaces status err-disabled

Port      Name               Status       Reason
Te1/4/4      adfadf Metro  err-disabled diagnostics
     

6 REPLIES
Hall of Fame Super Blue

After upgrading our link form 1000Mbps to 1200 Mbps we are recei

Please provide the output to the command "sh post" and "sh diagnostic result switch 1 module 4 detail".

Community Member

After upgrading our link form 1000Mbps to 1200 Mbps we are recei

show post is not working

AAA#show diagnostic result switch 1 module detail

Error:Out of range(1,13) module no: 0

Kindly find the show version output.

show version
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 16-Apr-09 17:59 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

asdf uptime is 3 years, 2 weeks, 4 days, 16 hours, 39 minutes
Uptime for this control processor is 3 years, 2 weeks, 4 days, 16 hours, 24 minutes
Time since asdfa switched to active is 3 years, 2 weeks, 4 days, 16 hours, 39 minutes
System returned to ROM by Stateful Switchover at 15:22:32 IST Sun Jul 19 2009 (SP by power-on)
System restarted at 15:39:00 IST Sun Jul 19 2009
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-33.SXH5.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.4) with 983008K/65536K bytes of memory.
Processor board ID SMC1145006U
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
8 Virtual Ethernet interfaces
102 Gigabit Ethernet interfaces
28 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

Hall of Fame Super Blue

Re: After upgrading our link form 1000Mbps to 1200 Mbps we are r

How about the "sh diagnostic result switch 1 module 4 detail"?

Can you try to re-seat the line card?  (Pull it halfway out of the slot and putting it back in?)

Can you also try MOVING the line card into a different slot?

Community Member

Re: After upgrading our link form 1000Mbps to 1200 Mbps we are r

show diagnostic result switch 1 module detail

Error:Out of range(1,13) module no: 0

will try for re-seat of line card

Community Member

Re: After upgrading our link form 1000Mbps to 1200 Mbps we are r

Re-seated the link card still the issue occurs

Community Member

Re: After upgrading our link form 1000Mbps to 1200 Mbps we are r

Re-seated the link card still the issue occurs

645
Views
0
Helpful
6
Replies
CreatePlease to create content