I'm working on trying to allow file and print sharing, a used being able to run a UNC path using windows to a server anc copy a file across. The server destination resides in a Vlan when the file and print sharing protocols are not allowe. I've allowed these protocols through as per cisco documentation, unfortunately it still doesn't work. I ran Wireshark on this to see what other protocols I'm missing, the only protocol being used as per wireshark is tcp 445.
The close Vlan for example is VLAN 202
IP Address is 192.168.1.128 /25
The destination server address is: 192.168.1.88
Terminal Server is 192.168.8.200
When I have an ACL allowing ip host 192.168.8.200 to host 192.168.1.88 everything works fine. However when I allow
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.