03-26-2007 08:01 AM - edited 03-05-2019 03:06 PM
I have a brand new switch WS-C2960G-48TC-L with ios "flash:c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25.SEE2.bin"
and when i configure vlan trunks with any other type of switches (2950,2960,2970) the port led on both switches changes continusly from green to amber. The trunk seems that it's working with no CRC errors or interface resets.
Anyone that can help on this. Cisco said that this is a link-fault indication nothing else.
03-26-2007 08:20 AM
if i remember, the 2960 is a gig switch. green means gig, amber means 100mb.
03-27-2007 10:19 AM
If its alternating maybe the switch is trying to negotiate gig but is goign back to 100. Try manually setting the speed and duplex on both ends of the link and see if it stays one color.
David.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide