Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

An error in 2501

Hi

I'm getting an error in my 2501 router. Can someone please explain what this is?

Router>

00:01:12: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

00:01:22: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

00:01:32: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

00:01:42: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

00:01:52: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

00:02:02: %LANCE-1-MEMERR: Unit 0, memory error, csr0=0xAAF3

I continuously get this error message. My interfaces are going up and down. I notice this, from the other router, because when I connect this router to the other router, it shows me the interface that the problematic router is connected to, is going up and down continuously.

Any help would be highly appreciated.

Thanks in advance!

Omal

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: An error in 2501

you can try to replace the memory in slot0 of the router first; this may remedy.

if replaced memory gives the same symptom, the memory slot is bad and the router will need to be repaired/replaced.

4 REPLIES
Silver

Re: An error in 2501

Hi Omal

This is a hardware problem. Your router needs to be repaired.

Hope this helps

New Member

Re: An error in 2501

Hi

Thanks a lot for your update. It was really helpful.

Best regards

Omal

Blue

Re: An error in 2501

you can try to replace the memory in slot0 of the router first; this may remedy.

if replaced memory gives the same symptom, the memory slot is bad and the router will need to be repaired/replaced.

New Member

Re: An error in 2501

Hi

Thank you very much for you help.

Best regards

Omal

146
Views
4
Helpful
4
Replies
CreatePlease login to create content