Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

anti spam module on ASA5510 urgent

hi all,

in my ASA 5510 my inside network is 192.168.10.0/24. DMZ is 172.16.2.0/24.

my antispam ip address i configured as 10.10.10.5/24 and its connecting directly to the perimeter router im updating the anti spam thru nat. now im getting lot of spam mails so how can i control the spam mails my smtp server is in 192.168.10.0/24 network and also in 172.16.10.0/24 network. so how can i configure the anti spam module to control tha spam which is coming to atleast one of these networks.

Regds

Binoy

1 REPLY

Re: anti spam module on ASA5510 urgent

Hello Binoy,

Do you have sufficient licenses for anti-spam ? can you confirm with a show version output?? I think you will have it by default, but just check it...

Check this URL and make sure you have configured the anti SPAM configurations right..

http://cisco.com/en/US/products/ps6120/products_administration_guide_chapter09186a00805e250b.html#wp1041368

There are some really good training on the URL below:

http://www.cisco.com/web/learning/le31/le29/configuring_asa_pix_security_appliances.html

check for the CSC SSM training.. you will get some good info...

Raj

185
Views
0
Helpful
1
Replies
CreatePlease to create content