Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

apple ichat on different network segments does not work

 

Hi,

End users can not communícate with Apple ichat, when Mac are  in differentes network segment.

I applied the following commands in sw core but no success.

 

any recommendation?

 

 

 

ip multicast-routing   --->>> I added this command

 

nterface Vlan103
 description 3er_Piso
 ip address 192.178.3.1 255.255.255.0
 ip pim dense-mode   -------------> I added this command
!
interface Vlan104
 description 4to_Piso
 ip address 192.178.4.1 255.255.255.0
 ip pim dense-mode  --------------> I added this command
!
interface Vlan105
 description 5to_Piso
 ip address 192.178.5.1 255.255.255.0
 ip pim dense-mode    -------------------->   I added this command
!

 

 

1 REPLY

I see that is an old post, so

I see that is an old post, so you get it resolved?

I have the same issue

Cheers Bruno Rangel Please remember to rate helpful responses using the stars bellow and identify helpful or correct answers .
62
Views
0
Helpful
1
Replies