Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Apply additional license to 3750-E stack

I have one stack with two 3750-E and only one switch with IP advanced services license to run OSPF. The second switch still has its original license (IP base). I got from Cisco a license file for the second switch (ip advanced). I have tried the normal procedure to install the license but it is stil not working. I am getting "xml parsing file" error. We ruled out the possibility of a corrupted file.

Is there any specific procedure to apply this license to the second switch while it is on a stack and running? Do I need to separate the stack to apply the license to the second one?

Why do I want that? - in case one fail the other one can handle the OSPF process (high avalability reasons).

Thank you.

5 REPLIES
Cisco Employee

Re: Apply additional license to 3750-E stack

You can copy the license file to the stack member's flash first, and then use the command session 2 to access the member's command prompt, and follow the usual license procedure.

http://www.cisco.com/en/US/docs/ios/12_2/12_2se/feature/guide/se_cisl.html#wp1063250

HTH,

jerry

New Member

Re: Apply additional license to 3750-E stack

Ok - one more detail. Do I need to add the ".lic" for the file name? or - is there any specific extension I need to add to the license file name to complete the installation?

VIP Super Bronze

Re: Apply additional license to 3750-E stack

Yes, you need the entire name and lic.

VIP Super Bronze

Re: Apply additional license to 3750-E stack

I had the same exact error message with 3 3750-E switches (not stacked). It took us a long time with TAC, our SE and sales rep to get this resolved (what a pain).

1-try adding a forward "/" after flash

and before you add the .llc file.

The correct syntax on the 3750E is:

#license install flash:/CAT1114R0CO_20090526094501582.lic

(NOTE THE "/")

2-If that does not work, make sure when you download the license key use upper case not lower. For some reasons, if the license in the key file is in lower case, it would not work. Because the actual license on the box is in upper case

HTH

Reza

New Member

Re: Apply additional license to 3750-E stack

Thank you Reza,

I will try during my next maintenance window 9-13 and will let you know.

I am having the same problem - the case is going from one group to the other and not a clear answer so far.

Thank you.

Machado

720
Views
9
Helpful
5
Replies