cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
788
Views
0
Helpful
3
Replies

Applying a Service-Policy to an SVI w/HSRP

Dean Weeks
Level 1
Level 1

Can it be done?

I'm trying to, on a pair of WS-C3560G-24TS switches running IOS c3560-ipservicesk9-mz.122-25.SEE2.bin, without success.

Each switch has a routed link to the core and are trunked together. They each have an SVI, Vlan302. The SVI's are configured as HSRP group 1, providing one fault tolerant gateway for Vlan302.

Is it possible to apply a service-policy to this vlan?

For Example:

int vlan302

service-policy input Packet-Tagging

policy-map Packet-Tagging

class Business_Critical

set precedence 3

class-map match-any Business_Critical

match access-group name ERP_traffic

Thanks for your replies!!!

3 Replies 3

royalblues
Level 10
Level 10

If you are trying to set outbound service policy on the 3560, then unfortunately it is not supported on the above platform due to asic limitation

3560 supports only ingress service policies.

HTH

Narayan

Sorry, I should have included this...

For Example:

int vlan302

service-policy input Packet-Tagging

policy-map Packet-Tagging

class Business_Critical

set precedence 3

class-map match-any Business_Critical

match access-group name ERP_traffic

Narayan-

Do you know when the 3560 started supporting policies on SVI's?

Review Cisco Networking products for a $25 gift card