Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Applying MLS QoS ... Commands

Hello,

Can anyone please tell me if applying the commands "mls qos trust cos" and "mls qos trust dscp" on a 6509 running version 2.2(18)SXF10 will cause any service disruptions?

Thanks,

Pradeep

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Applying MLS QoS ... Commands

Pradeep,

Adding those commands should not affect anything that the device is currently doing. Unless you have already configured "mls qos" at the global level, and configured ingress/egress queue, mapping etc - othewise, traffic on that specific port will be subject to the QoS policy you have configured.

HTH.

3 REPLIES

Re: Applying MLS QoS ... Commands

Pradeep,

Adding those commands should not affect anything that the device is currently doing. Unless you have already configured "mls qos" at the global level, and configured ingress/egress queue, mapping etc - othewise, traffic on that specific port will be subject to the QoS policy you have configured.

HTH.

New Member

Re: Applying MLS QoS ... Commands

Thank you Andrew!

Re: Applying MLS QoS ... Commands

np - glad to help.

171
Views
0
Helpful
3
Replies