I'm using the archive command to backup the config of a switch to a tftp server every time a user enters the write memory command. The problem that I have is that a sequence number is automatically added to the end of the file name. The commands I'm using are below. I've also tried removing the $h and specifying a file name but to no avail.
The only 2 switches I can find in documentation are $h and $t. The first makes the filename the name of the switch, the second timestamps the file name. I'm hoping there's one that stops the sequence number being added to the file name.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...