08-08-2013 11:04 AM - edited 03-07-2019 02:49 PM
How do you show the current arp timeout on router. I have a 3825 and a 2811.
Thanks in advace.
Alfred
Solved! Go to Solution.
08-08-2013 11:40 AM
Arp timeout can be found per interface when you do a "show int
Router(config)#do sh int fa0/1 | i ARP
ARP type: ARPA, ARP Timeout 04:00:00
You can change it per interface with the "arp timeout
HTH,
John
*** Please rate all useful posts ***
08-08-2013 11:40 AM
Arp timeout can be found per interface when you do a "show int
Router(config)#do sh int fa0/1 | i ARP
ARP type: ARPA, ARP Timeout 04:00:00
You can change it per interface with the "arp timeout
HTH,
John
*** Please rate all useful posts ***
08-08-2013 12:05 PM
Thanks John, that works !
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: