Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ARP TIMEOUT

How do you show the current arp timeout on router.  I have a 3825 and a 2811.

Thanks in advace.

Alfred                  

1 ACCEPTED SOLUTION

Accepted Solutions

ARP TIMEOUT

Arp timeout can be found per interface when you do a "show int | i ARP"

Router(config)#do sh int fa0/1 | i ARP

  ARP type: ARPA, ARP Timeout 04:00:00

You can change it per interface with the "arp timeout " command on the interface. Default is 4 hours...

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
2 REPLIES

ARP TIMEOUT

Arp timeout can be found per interface when you do a "show int | i ARP"

Router(config)#do sh int fa0/1 | i ARP

  ARP type: ARPA, ARP Timeout 04:00:00

You can change it per interface with the "arp timeout " command on the interface. Default is 4 hours...

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
Community Member

ARP TIMEOUT

Thanks John, that works !

154
Views
0
Helpful
2
Replies
CreatePlease to create content