Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

AS5350 E1 R2

Misters, prompt that it is necessary to adjust at AS5350. A problem following: is AS5350 and automatic telephone exchange Alcatel which are joined on stream E1 to signal system R2. There is a problem when AS5350 does not understand, that the client has hanged up. I shall tell more particularly: the client has hanged up, and sluice AS5350 does not understand, that it is necessary to tear connection. We have lag of lines in a stream. Now it is adjusted so:

controller E1 1

framing NO-CRC4

clock source line secondary 1

ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani

cas-custom 0

country easteurope

dnis-complete

timer interdigit incoming 3000

How will get rid of it?

1 REPLY
Silver

Re: AS5350 E1 R2

This command is used when AS5400 with E1/R2 lines might periodically have an increasing number of timeslots which go out of service.clear the blocked E1 timeslots on the E1/R2 switch

155
Views
0
Helpful
1
Replies
CreatePlease to create content