08-26-2013 04:20 AM - edited 03-07-2019 03:07 PM
Hi all,
We are using a ASR 1001 series router as a gateway router. What is the exact command to see the process usage of the system??
Thanks.
Solved! Go to Solution.
08-26-2013 11:02 PM
show processes memory
show memory
show platform software status control-processor brief
show platform software process slot R0 monitor
http://www.cisco.com/en/US/products/ps9343/products_tech_note09186a0080af252a.shtml
HTH
Regards
Inayath
********PLZ DONT FORGET TO RATE THIS POST IF THIS INFO IS HELPFULL***************************
08-26-2013 10:46 PM
Anyone can you help
08-26-2013 11:02 PM
show processes memory
show memory
show platform software status control-processor brief
show platform software process slot R0 monitor
http://www.cisco.com/en/US/products/ps9343/products_tech_note09186a0080af252a.shtml
HTH
Regards
Inayath
********PLZ DONT FORGET TO RATE THIS POST IF THIS INFO IS HELPFULL***************************
08-29-2013 01:17 AM
Thanks Sharieff
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide