Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Assigning specific IP address permenantly through DHCP in 4506e

Hi,

I have 4506e switch and configured DHCP pool.

But for two PCs which I have connected to core switch need to assign specific IP address through DHCP only.

How can I achieve this?

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Assigning specific IP address permenantly through DHCP in 4506e

Hi Vishal,

You can try DHCP binding, where in you bind the MAC address of the PC to one specific ip address on the DHCP pool. Please go through below url and look under heading "Setting Mannual Binding"

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a00800f0804.shtml

Hope that helps.

Regards

Najaf

5 REPLIES
Gold

Assigning specific IP address permenantly through DHCP in 4506e

Hi Vishal,

You can try DHCP binding, where in you bind the MAC address of the PC to one specific ip address on the DHCP pool. Please go through below url and look under heading "Setting Mannual Binding"

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a00800f0804.shtml

Hope that helps.

Regards

Najaf

New Member

Assigning specific IP address permenantly through DHCP in 4506e

Thanks Najaf.. It worked

Gold

Assigning specific IP address permenantly through DHCP in 4506e

Hi Vishal,

Glad that it is working as expected:-)

Please mark the post as answered which will then helps other users with similar issue to find proper resolution.

Regards

Najaf

Cisco Employee

Assigning specific IP address permenantly through DHCP in 4506e

Najaf,

That's a very nice document! Thanks!

Best regards,

Peter

Gold

Assigning specific IP address permenantly through DHCP in 4506e

Thanks Peter for the Endorsment.

Really apprciate this.

Regards

Najaf

240
Views
0
Helpful
5
Replies
CreatePlease login to create content