Astro Errors - CAT 4006 - Is this a possible SUP III module problem?

astanislaus · ‎01-05-2007

show log

Jan 6 14:53:32: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 5-2(Fa

pagp Port channel information

5/9-16) - consecutive management requests timed out.how platform debug state

Jan 6 14:53:33: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 2-5(Fa

policy-map Show QoS Policy Map

2/33-40) - consecutive management requests timed out. Switch Power

radi

Jan 6 14:53:35: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIM

4/41-48) - consecutive management requests timed out.

tacacs Shows tacac

Jan 6 14:53:41: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 3-4(Fate Template information

ter

3/25-32) - consecutive management requests timed out.ers

Jan 6 15:00:46: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOfigura

5/33-40) - consecutive management requests timed out.

vlan VTP VLAN status

Jan 6 15:03:32: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 6-2(Fa

6/9-16) - consecutive management requests timed out.

bootflash: display information abo

Jan 6 15:03:32: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 6-5(Fa

bootvar Boot and related environment variable

6/33-40) - consecutive management requests timed out.alendar Display the hardware calendar

Jan 6 15:03:32: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Asty information about ca

2/1-8) - consecutive management requests timed out.

flowcontrol

Jan 6 15:03:34: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 5-6(Fa

5/41-48) - consecutive management requests timed out.

Jan 6 15:03:34: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 6-1(Fa

6/1-8) - consecutive management requests timed out.

Jan 6 15:03:35: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 5-2(Fa

5/9-16) - consecutive management requests timed out.

Jan 6 15:03:35: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 5-1(Fa

5/1-8) - consecutive management requests timed out.

Jan 6 15:03:35: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 4-2(Fa

4/9-16) - consecutive management requests timed out.

Jan 6 15:03:35: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 2-5(Fa

2/33-40) - consecutive management requests timed out.

Jan 6 15:03:37: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 2-6(Fa

2/41-48) - consecutive management requests timed out.

Jan 6 15:03:37: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 6-3(Fa

6/17-24) - consecutive management requests timed out.

Jan 6 15:03:43: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 4-6(Fa

4/41-48) - consecutive management requests timed out.

Jan 6 15:03:44: %C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING: Astro 3-4(Fa

3/25-32) - consecutive management requests timed out.

sourabhagarwal · ‎01-06-2007

%C4K_LINECARDMGMTPROTOCOL-4-ONGOINGTIMEOUTWARNING (x16):

Explanation: There are persistent communication problems with the module ASIC

that fans out a single gigabit port to front-panel ports.

Recommended Action: Reinsert the module.

hope it helps ... rate if it does ...

glen.grant · ‎01-06-2007

Try powering the switch all the way down . Earlier versions of this switch had sdram problems sometimes asic timeout would occur , later versions of code actually had a built in test that runs in the background that tests this and if it see a problem it isolates the problem areas and reloads itself . If this happens it should be replaced anyway but the switch will continue to work until you get a replacement . This also could be caused by a faulty or infected station on the switch using up all the bandwidth causing the supervisor to be unable to talk to the linecards . You could try pulling one linecard at a time to eliminate that possibility or disable one module at a time from the command line just don't hang yourself out by disabling the card that feeds the uplink .

astanislaus · ‎01-06-2007

It appears that the problem has been resolved by replacing the SUP III module. Still on monitor.