10-04-2014 11:15 AM - edited 03-07-2019 08:59 PM
Dear Concern,
Is it possible that, i configure some command for multipale switches in one time. Main to say that, I have 50 layer 3 switches, and some time need to configure some command on all switches. Then i login all switches one by one and configure them manually. . Is there any method that i configure one command and it automatically be configured for all the switches in one time.
Regards,
Adnan
10-04-2014 02:22 PM
There are a couple of ways to do that:
10-07-2014 04:21 AM
If you have any Linux/Unix skill you can script something to connect to each device and deliver the commands.
A few years ago I used the 'expect' tool http://expect.sourceforge.net/
We built a script to logon to a list of routers from a .CSV file and issue a 'show version' command to audit the IOS versions running a load of switches and routers in a large network we managed. Good times!
Matty
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide