cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
6
Helpful
3
Replies

auto-negotiation problem

CHN
Level 1
Level 1

hi,help me guys.

i am still confused which one will disable auto-negotiation,setting speed,or setting duplex,or any one of them?

thanks

ragards

Alex

3 Replies 3

icabrera
Level 4
Level 4

Hi, here you have a very good document that explain the different situations:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml

Regards

Hope this helps, if so pls rate post

although you don't answer my question positively,the doc you recommended is pretty useful!

regards

ALEX

glen.grant
VIP Alumni
VIP Alumni

Very simple rule of thumb that has to be followed , if the client nic has a hardcoded speed/duplex then the switch must be hardcoded also . If the user nic is set as auto then the switch must be set as auto also for speed and duplex. If one is auto and the other is hardcoded that is a mismatch and will give all kinds of errors and slow response.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: