Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

auto smartports with no link up

Hi

I have a port that is being configured by auto smart ports when an IP phone is connected the config is applied correctly.

The problem is the port is configured for multi-domain auth and when the pc connected to the done authenticates the macro gets handed back by my radius server fine but does not fire. I'm thinking the problem is that there is no link up to trigger the macro as the port is already up due to the phone being connected. I've read that link ip/down is mandatory in the macro for smartports to determine weather to run the macro or the anti-macro.

Any help appreciated

Dale

Everyone's tags (5)
224
Views
0
Helpful
0
Replies