Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

automated device provisioning (reset)?

For a lab setting, is there a way to automatically reset all devices to default/destired settings, no matter what has been done, including changing password, misconfigured console/aux/vty lines, deleted image file, disabled ports etc...

For example, I set up the lab and access it remotely through an access server. How can I reset it to preconfigured-default if I misconfigured something to lock myself out?

Thanks

1 REPLY

automated device provisioning (reset)?

Take a look at the rollback feature and see if that will help you:

http://www.cisco.com/en/US/docs/ios-xml/ios/config-mgmt/configuration/xe-3s/asr1000/cm-config-rollback.html

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
220
Views
0
Helpful
1
Replies
CreatePlease to create content