We have a mobile site that connected to our network through trunk port wireless radio, that site has two vlans one for data and another one for voice "Ip phone", my problem is whenever this site moves from location 1 to location 2 the vlans id's are changed (based on the base station that will connect to) and I have to manually reconfigure this switch vlan’s from location 1 "vlans" to location 2 "vlans", my question is, can we automate this things i.e. can we configured a port to pick the proper available access and voice vlan's without manually reconfigure these ports. I know that a port can be configured only for one access/voice vlan.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...