S, i can able to reach the TFTP server but my problem is how to enter the name in that filed can you provide the cammands for taking the ios name from the DIR. In router we can directly copy the image name. here iam not able to paste the image name correctly. It covers the location where we want to specify the ip add of TFTP SERVER.
while i am pasting the image name to the source filename:it covers the remote host: portion also.But i heard from Flash DIR i can take the ios image name but i dont know how to take it from the DIR. If you know how to to take the back up from the 3750 switch ple provide the command also..
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...