Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

backplane speed

Hi,

Please let me know is there any show command which will help to get the backplane speed of switch 6509 with sup 720.

If there is no show command please provide a link for that.

Also what exactly the command "sh fabric status " shows.

Is the command dispalys the Supervisor fabric capacity ?

If there is no Switch fabric Module installed in the switch will the command have any output.

Kindly help

3 REPLIES
Purple

Re: backplane speed

All sup 720's have a built in fabric module I believe so that should be a valid command.

New Member

Re: backplane speed

Hi,

Please let me know how we can see backplane speed ?

Is inbuilt switch fabric same as backplane ?

Thanks

Hall of Fame Super Bronze

Re: backplane speed

The potential backplane speed in a 6509 running Sup720 can be up 360Gbps (720Gbps full-duplex 'marketing').

The modules installed in the switch play a big role in achieving the speed.

For more information on the 6500 switch architecture, please take a moment and read this document:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd80673385.html

HTH,

__

Edison.

176
Views
0
Helpful
3
Replies