Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Backup

Hi

I have 10 routers and 25 switches. I want to take Software (IOS) backup of all devices and startup-configuration.

Is it possible to automatically perform every month.

Is it possibiliy to restore from central location as well.

Thanks

ST

7 REPLIES

Re: Backup

Hi saquib

You can have a basic tftp or ftp servfer, and manually copy the config and IOS, using the copy running tftp, copy flash tftp commands.. In anycase if you want to automate it, you need to have NMS systems which are capable of doing this.. Cisco has Ciscoworks products which uses Resource Manager Essentials (RME) suit in LMS bundle,  which does this automatically. you can have a look at the NMS products that Cisco offers in the following URL:

http://www.cisco.com/en/US/products/sw/netmgtsw/index.html

Look at Ciscoworks Lan management solution bundle..

Hope this helps.. all the best...

Raj

Purple

Re: Backup

I would look at the solarwinds products for something thats not quite as pricey as Ciscoworks .  It will do what you want .

New Member

Re: Backup

Hi,

To my knowledge solarwinds only backup an restore configuration but cannot backup IOS.

Do solarwinds now support IOS Backup.

Based on experience do you recommend and tftp software.

Re: Backup

Hi Saquib

there are tons of tftp servers available for download.. i ahve been using 3CDaemon.. its a very nice tftp / ftp server software which is reliable.. Im not sure of solarwinds doing IOS backups... You can probably check their site..

As Glen suggested, costwise LMS might be a little expensive.. it really depends on what you need your NMS systems to do.. If you think your network is small, you can just backup configs using solarwinds, and manually do a tftp download of IOS to a central server.. IOS upgrades or changes would not happen that frequent on your network, as compared to a configuration change..

Hope this helps..All the best

Raj

Purple

Re: Backup

  Solarwinds also has free tftp server software  for download if thats all you need .

New Member

Re: Backup

Thanks for your reply.

What config is needed on router and switch for TFTP setup ( backup IOS for router & switch )

Re: Backup

You need to setup the tftp server, and use the command copy flash tftp

it will then ask you for the IOS which has to be backed up. make sure you can reach the tftp server (ping) from your router or switch before copying the IOS.

Hope thsi helps.. all the best

Raj

336
Views
5
Helpful
7
Replies
CreatePlease to create content