to whom it concerns,I'm trying to set up a QoS policy whereby traffic coming from a certain Vlan is limited to 192k on the WAN interface of a 6509 SUP32. Also all traffic back to this Vlan should be blocked except for a defined list of IP addresses.
Can anyone help with the code here please or just give a rough idea of how to implement this????
I would filter the allowed IPs with an ACL, pretty straight forward there. The QoS may be a beast. Are there other subnets using the application? Do you have QoS on the WAN already? Are you looking to shape or drop the traffic? Is the application susceptible to latency?
thanks for the reply. Basically we have one Vlan set aside for Video conferencing, these devices connect via IP over the WAN up-link a LAN connected 7200 Router. We'd like to be able to restrict the bandwidth used by the Video Conferencing to 192k. We'd like to implement this on the 6509 gi 1/48 port which connects to the Router.
Is the VC set to use LAN speed? On most you can set the max speed (ie 192K). Depending on the linecard you may/may not be able to police/shape. A great document is the SRND for QoS. Here's a link to it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.