Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Bandwidth Capping on cisco 3945

Hi all,

We have cisco 3945 router with 45mbps of BW and we have around 40 PCs in our lan, we need to create a ip based bandwidth capping, ex 192.168.10.2 should get 2mbps of speed and 192.168.10.3 should get 3mbps of speed.

Please advice.

1 REPLY
Silver

Simple, use QoS through

Simple, use QoS through Service Profile configuration (class-map and policy-map)  ^_^

Config Guide: HERE

Basically, the class-maps define the condition e.g., defines the source and destination
While Policy-map defines the action e.g., limit their BW if they match the condition

61
Views
0
Helpful
1
Replies
CreatePlease to create content