I currently have an MPLS cloud that connects our corporate office with our remote locations with QoS applied to it. Everything works like a champ but my problem is that some of users located at the corporate office need to access the security cameras remotely. This security cameras are high definition devices; therefore, they take as much bandwidth as they possibly can. As of now, all this traffic is in the best effort category so they are having a hard time accessing the device. I have a video category but I can't use it for this type of traffic.
I would like to hear some suggestions as far as what you have done for your company if you had this issue. I am currently debaiting on whether or not to use a complete separate network using a cable provider since this is going to continue growing. I forgot to mention that they also want to push marketing content to the remote locations.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...