Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Bandwidth Management through Cisco Router

Hi,

I have got an cisco router with 3 interface. Interface FA 0/0 is an outside interface and interface fa0/1 and fa0/2 are inside interface.

Int Fa0/0
Desc Connected to Outside, the inside internet traffic passes through this router
ip address 192.168.200.1 255.255.255.0

Int Fa0/1
Desc Connected to Remote
Ip Address 10.10.0.1 255.255.0.0

Int Fa0/2
Desc Connected to HO
Ip Address 192.168.100.1 255.255.255.0

Now I want to apply bandwidth restriction as follows:

1. Full Bandwidth for Private Address from all sources.
2. Full Bandwidth for 173.194.38.150, 209.191.122.42 from all sources
3. 1 Mbps limitation for 202.51.65.57 through 10.10.10.0/24, 10.10.20.0/24 and 10.10.30.0/24
4. 2 Mbps limitation for 202.51.69.57 through 10.10.101.0/24, 10.10.201.0/24 and 10.10.205.0/24
5. Full Bandwidth from 192.168.100.0/24 to any
6. 0 Mbps internet for rest.

Is this possible in cisco router, please guide me.

Thanks in advance


- Mero

3 REPLIES
New Member

Re: Bandwidth Management through Cisco Router

Pls help

Sent from Cisco Technical Support iPhone App

New Member

Bandwidth Management through Cisco Router

hi,

    just go to each int and try out the bandwith command. it might help.. what is the model of router .

example:

 bandwidth 128 (this is in kilobits)


http://certcollection.org/forum/topic/55536-limit-bandwidth-on-a-cisco-catalyst-switch-port/

New Member

Re: Bandwidth Management through Cisco Router

Dear Anirudh,

Cisco 1841, bandwidth mgmt to each interface won't work because it have to be unlimited for private ip and also unlimited for some public ip

Mero

Sent from Cisco Technical Support iPhone App

254
Views
0
Helpful
3
Replies
CreatePlease to create content