Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bandwidth Problems of Subnets in the same Vlan

Hi Community,

We have faced a strange problem in our customer while implementing non-cisco switches in their network. Firstly, we suspected from the switches but when we remove the newly installed switches from the network the problems still go on in cisco devices. The bandwidth when we transfer some files between vlan 3 subnets couldn't reach 10Mbps. But from any vlan 3 subnets to Vlan 1 or vlan 200 subnets, it easily reach 100Mbps.

Let me exceed the details of problems. Customer has 3 vlans and their subnets like this:

Vlan 3:

X.Y.124.0/24

X.Y.123.0/24

X.Y.121.0/24

X.Y.120.0/24

X.Y.96.64/26

X.Y.126.0/24

X.Y.96.0/26

Vlan 1:

X.Y.96.192/26

X.Y.126.0/24

Vlan 200:

X.Y.127.0/24

As you can see in the basic topology, we make our tests via winscp by transferring files. Here are some test results that we made.

SERVERTEST-PCBandwidth Rate
X.Y.96.3X.Y.96.878 Mbps
X.Y.96.3X.Y.96.10100 Mbps
X.Y.96.3X.Y.120.20010 Mbps
X.Y.96.3X.Y.121.20010 Mbps
X.Y.96.3X.Y.96.20095 Mbps
X.Y.96.3X.Y.126.20095 Mbps
X.Y.96.3X.Y.127.200100 Mbps
X.Y.127.201X.Y.126.200100 Mbps

Shortly,

Vlan 1 to vlan 200, 3 subnets --> all OK, 100 Mbps

Vlan 200 to Vlan 1,3 subnets --> all OK, 100 Mbps

Vlan 3 to Vlan 1,200 subnets --> all OK, 100 Mbps

Vlan 3 between its subnets --> problem, max 10 Mbps

Vlan 3 in the same subnet host --> all OK, 100 Mbps

What can be done in this situation?

Everyone's tags (5)
5 REPLIES

Re: Bandwidth Problems of Subnets in the same Vlan

       Hello ,

What switch model are you using and could it be possie for you to share th interface stats what is hapein when traferring the data from PC over vlan 3 to others.

Regards

Ganeshh Iyer

New Member

Bandwidth Problems of Subnets in the same Vlan

Actually customer divided subnets to 2 vlans (vlan1 and 3) for entering the traffic to the IPS a couple years ago. When I change any subnet's vlan membership from 3 to 1, the problem seems resolved. Another interesting thing  is that when I disable IPS, problem still goes on unless I change subnet's vlan. Finally, I have to manage IPS in another way.

Thank you,

Bandwidth Problems of Subnets in the same Vlan

Mehmet Halil Yeni wrote:

Actually customer divided subnets to 2 vlans (vlan1 and 3) for entering the traffic to the IPS a couple years ago. When I change any subnet's vlan membership from 3 to 1, the problem seems resolved. Another interesting thing  is that when I disable IPS, problem still goes on unless I change subnet's vlan. Finally, I have to manage IPS in another way.

Thank you,

It would be helpful if you can represent in diagramatic presentation what exactly is issue is ....

Cisco Employee

Bandwidth Problems of Subnets in the same Vlan

Hi Mehmet,

Where is the intervlan routing? I see that you have different subnets in vlan 3. How is the routing between these subnets?

Regards,

Hari

Bandwidth Problems of Subnets in the same Vlan

HI Mehmet,

what about the duplex settings? How did they negotiate them? Try to hardcode the speed and the values and to disable DTP.. After this check the CRC on the interfaces..If this issue persist it probably would be a good idea to re-configure the broadcast domains and/or to tune them

Hope this helps

Alessio

522
Views
0
Helpful
5
Replies