Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bandwidth restrictions on 877

We have a client who is using a Cisco 877 for internet access (via ADSL - 8Mb down, 0.8Mb up) for both their Corporate staff and their Guest network. They have come to us with a requirement that the Guest network should never have more than 1Mb (down) of bandwidth.

What would be the best way to implement this?

Sanitised config attached: note that the only reason I'm using BVI interfaces is that the config is on an 877W and I'm testing on an 877!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Bandwidth restrictions on 877

You can attach a service-policy on the BVI that is for that particular dot11radio interface trunk for Guest SSID.

Example:

interface BV2:

service-policy input QoS_In_BVI2

service-policy output QoS_Out_BVI2

policy-map QoS_In_BVI2

class class-default

police 150000

policy-map QoS_Out_BVI2

class class-default

police rate 500000

You can adjust the rate value to what you want:

Target Bit Rate (bits per second)

2 REPLIES

Re: Bandwidth restrictions on 877

You can attach a service-policy on the BVI that is for that particular dot11radio interface trunk for Guest SSID.

Example:

interface BV2:

service-policy input QoS_In_BVI2

service-policy output QoS_Out_BVI2

policy-map QoS_In_BVI2

class class-default

police 150000

policy-map QoS_Out_BVI2

class class-default

police rate 500000

You can adjust the rate value to what you want:

Target Bit Rate (bits per second)

New Member

Re: Bandwidth restrictions on 877

Absolutely perfect, thank you.

230
Views
0
Helpful
2
Replies
CreatePlease login to create content