We plan to plug desktop computers in to the ports on the builtin switch on the phones. What kind of config do I need to add to each interface used for the phone/desktop configuration? Should the existing global qos settings be okay as well?
Below I have posted the existing qos settings on the switches as well as the trunk port config for all switches.
one item to check is whether or not the Aastra phones are capable of marking the COS value. i.e. Cisco and Nortel phones mark COS values differently and this will make a difference as to whether or not the COS-DSCP map is appropriate or needs a slight change.
You may need to use a sniffer to see what the COS value is on the actual phone.
The phone setup allows you to configure the COS value. I am wondering if this config should work? Short of generating a bunch of traffic are there some statistics I can look at to see queue usage levels and such to confirm it (QOS) is working?
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...