Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Basic Switch Configuration

Please provide me a link to documentation about an initial basic switch configuration for a small LAN.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Basic Switch Configuration

Here's a link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2955/software/release/12_1_12c_ea1/configuration/guide/2955scg.html

There will be diagrams in there, and more of what you're looking for I believe.

John

HTH, John *** Please rate all useful posts ***
5 REPLIES

Re: Basic Switch Configuration

What are you wanting to know? The most basic switch config would be to power it up and connect devices. It'll just work.

If you want to manage it, you'll need to give it an IP address on it's vlan.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: Basic Switch Configuration

I was hoping for a link with material about basic management and configuration for a switch, with a network diagram.

Re: Basic Switch Configuration

Here you go

hxxp://www.tech-faq.com/cisco-switch-configuration.shtml

Re: Basic Switch Configuration

Here's a link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2955/software/release/12_1_12c_ea1/configuration/guide/2955scg.html

There will be diagrams in there, and more of what you're looking for I believe.

John

HTH, John *** Please rate all useful posts ***
New Member

Re: Basic Switch Configuration

jblakley: Thanks for the great article. Do you know of a similar article for a basic router configuration?

285
Views
0
Helpful
5
Replies
CreatePlease login to create content