Switching

Hi all,I am getting some odd messages on the switch logs & log server. Pls see below sample. Does anyone know what they mean?.TiIsrSpanCo 1TiIsrPktCon 40TitanIsrMainHandler C38TiIsrMETDec 3TiIsrPktPay 1TiIsrSpanCo 1TiIsrPktCon 40TitanIsrMainHandler C...

I have a Cisco 2811 router functioning as LAN router for an Ethernet handoff from my ISP. The connection is supposed to be 25MB yet all I can get is 8 at best and the speed varies from .18 to 7.9 up and down. Neither interface shows any errors but I ...

Hi all I hope you are fine I have to connect two Switches (cascade), i will explain more data.I have a Internet service that is provide in a ALCATEL switch and the internet service is in the port 1 this port has the next configuration: VLAN 866 port ...

I have a 3560 V2 48port switch that is working in a live environment and has a transceiver connected into one of the two transceiver ports and is working without issue.I am connecting a second fibre run to this switch. I have connected the transceive...

Building off of one of my earlier posts, I am working to segregate clients into VLANs based on their subscriptions to our service. We offer an SLA, with dedicated access (VLAN 3), and a "pay-as-you-go" option where they can pay in selected intervals ...

I've read that it is not recommended to stack more than 6 x 3850s in a stack, even though the maximum that can be stacked is 9 switches. Are there performance issues with stacks, the more switches you add? I would have thought the opposite. Would the...

Hi we have a two ISP for internet.we are looking if one ISP down another one has to another one has to serve.Please share cisco device which is capable of doing same thing and also guide me how to configure on the same. Please let me know required mo...

Hi All,Having a small issue at the moment with a 2 * 3850 switch stack.The stack isn't displaying mac learned on certain ports. The ports affected are spread over both switches. There is 14 ports having this issue. All other ports are working fine.I ...

Hi,I have a 3925 router running  with an "ISM-VPN background process" which is running high and causing the CPU to spike up to 80%.  There is a ISM-VPN card on the router as well.IOS version on router "c3900-universalk9-mz.SPA.153-1.T.bin"Seems like ...

I have a 3500 switch with IOS of 12.0 that does not accept the " show counters " command. I cleared them and want to see what ports are not being used so I can move the users over to a new switch. What is the correct form of show counters?