sw# show system resourcesLoad average: 1 minute: 0.33 5 minutes: 0.38 15 minutes: 0.31Processes : 576 total, 1 runningCPU states : 0.25% user, 1.00% kernel, 98.74% idle CPU0 states : 0.00% user, 0.00% kernel, 10...
sw# show system resourcesLoad average: 1 minute: 0.33 5 minutes: 0.38 15 minutes: 0.31Processes : 576 total, 1 runningCPU states : 0.25% user, 1.00% kernel, 98.74% idle CPU0 states : 0.00% user, 0.00% kernel, 10...
Is there a better way to upgrade these yet?Obviously, I want to reboot after-hours. The install command still cannot be scheduled.install add file flash:cat9k_iosxe.17.09.05.SPA.bin activate commit prompt-level noneIf I do not do prompt-level none th...
Hi, can anyone please advise whether SFP+ cisco SFP-10G-T-X can be used on cisco 3850 network module? thanks in advance!
Greetings,On an international L2 VPN service, the customer is complaining about latency.Here are several ping tests on the 2 PE routers:RouterA#ping mpls pseudowire b.b.b.b vcid source a.a.a.a repeat nSuccess rate is 100 percent (100/100), round-trip...
Hi all, I have a 3650 stuck in the switch prompt. I've tried to set the IP address using the below commands so that I can upload the IOS, but I am unable to. set IP_ADDR Set DEFAULT_ROUTERbelow is the file system outputswitch: dirList of filesystems ...
Hello,I have a Nexus 9K trunked to a C9200LOn the Nexus 9K the port is:interface Ethernet1/19switchportswitchport mode trunkswitchport trunk native vlan 888switchport trunk allowed vlan 1,254,995no shutdownOn the C9200L the port is:interface TenGigab...
Hi - I have a general question about where to find the official Cisco document for the Cisco Nexus 9300 ports and services requirements document?Thank You
I need to clarify if my Switch sg220-26 has POE ports. The documentation is confusing and I CANNOT see the POE Option for Port Management by entering as Switch Administrator.Otherwise, it is possible to make this Switch POE by placing some external s...
Bonjour a tous,Derrière un CBS350-8P-2G des bornes Wifi ont été ajoutées (peu importe les ports). Elles diffusent 2 SSID.Le 1er passe par le VLAN 1, le Second par le VLAN 11Il semble que le switch bloque la communication entre ces bornes et le routeu...
I have an SM-ES3-24-P switch module that seems to be in a failed state. How can I revive it?#service-module gi 2/0 statusService Module is Cisco GigabitEthernet2/0Service Module supports session via TTY line 131Service Module is failedService Modul...
Good day;Need help with how I can configure NAT overload with an existing vrf on a CAT9K_IOSXE V16.12. This is what I am struggling with, I currently have a vrf called AWSDX-S3. Now what I am trying to do is I have added a L2 SW and ran trunk ports...
Hello all, I am wondering if someone can help me to understand what's going on behind the hood with PVLANS on Cisco Catalyst. What I am trying to achieve may be totally the wrong application for PVLANS. If so lmk.Questions:I am having trouble wrappin...
HI i got ICMP response from host from 10.0.52.0/22 ip Series with using GW:10.0.52.2 firewall interface and also get RDP and ICMP to other location server using 172.10.8.0/21 ip series. Also got ICMP response but not get RDP of server from 10.0.11....
I wanted to test a local account on a Nexus switch and bypass the radius (ssh)connection. To do so, I add the aaa authentication login default local I am now able to access the local account but I wanna get back to the previous configuration. When...
I'm using a 9200 device running IOS 17.9.I use a script and spreadsheet to generate my config file, which I then copy onto my devices via TFTP and then copy to the running config. Nothing unusual there. However, if I then ask the device to show me th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 09:53 AM | ||
04-23-2024 08:31 AM | ||
04-23-2024 02:53 AM | ||
04-19-2024 05:58 AM | ||
04-17-2024 03:50 AM |
User | Count |
---|---|
11 | |
10 | |
8 | |
7 | |
6 |