Good evening Iam currently designing a telecom network(SS7 & NGN) monitoring software application based on cisco switching hardware - catalyst 3750,2960 & 2950 switches connected to a metro ethernet , I need desgn help , any documents , issues to take care of , all help appreciated.
Re: Best Practices for VLAN for Network monitoring
The best way to monitor network utilization is to use Network Monitoring Tools and technology. This would involve installing SNMP/RMON/Netflow management stations. Once this is done, SNMP/RMON/Netflow agent software can be enabled and configured on the switch. This will send raw data regarding traffic statistics to the stations which, when configured properly, will give you details regarding VLAN utilization, type of traffic seen on the network,etc.
There are several books available that describe how to setup Network
Monitoring. There is no built-in feature or bundled software in the switch to monitor network utilization.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...