BGP Inbound & outboud Load Sharing

[subhojithalder198]

Hi Team,.

I am looking for input on the below

1) We are having 2 ISP & same is terminated on Same router, We want to use the ISP link with active & passive & my traffic (incoming & outgoing) should use active link

So As per my knowledge, For outgoing we can use Weight/ Incoming we need to use ASPath prepend on passive ISP
Pls confirm

2)We are having 2 ISP & same is terminated on different router, We want to use the ISP link with active & passive & my traffic (incoming & outgoing) should use active link

So As per my knowledge, For outgoing we can use Local Pref/ Incoming we need to use ASPath prepend on passive ISP
Pls confirm

And, for the above 2 senario, in case I need to use ISP in Active/active condition, how to configure the same with BGP

Br/Subhojit

[Reza Sharifi]

Hi,

Here is a link with one router running BGP with 2 providers.

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008009456d.shtml

This link shows multiple routers with multiple providers with examples abd configs:

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00800945bf.shtml

HTH