BGP Peering Across A Firewall

[m.belateche]

Hi All

Two BGP routers one connected to the inside interface and the other to the outside interface of a Pix firewall and they need to peer with each other and excjange BGP routes. Is BGP going to work in this scenario? any pointers to a document on how to make this work?

thanks

[Harold Ritter · Accepted solution]

This works indeed and is a very common implementation. Please refer to the following document for a sample configuration.

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008009487d.shtml

Regards,