Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Binding MAC to IP using client-identifier

Hi,

I have 10 PCs on the network to which I want to allocate fix/specific IP from DHCP server configured on my 3825 Router. Currently I am using IP Pool & "client-identifier". Problem is that, for every Host/IP I need to create separate Pool. Is there any procedure via which I need not to create separate pool for separate IPs/Hosts. Below is the snap of Configs for ref.

************************

ip dhcp pool fixip-1

host 192.18.144.104 255.255.254.0

client-identifier 0100.2170.7b7c.ca

lease 7

!

ip dhcp pool fixip-2

host 192.18.144.105 255.255.254.0

client-identifier 0100.1b24.6190.ab

lease 7

!

ip dhcp pool fixip-3

host 192.18.144.106 255.255.254.0

client-identifier 0100.219b.e562.fd

lease 7

!

ip dhcp pool fixip-4

host 192.18.144.107 255.255.254.0

client-identifier 0100.0e7f.a421.af

lease 7

!

ip dhcp pool fixip-5

host 192.18.144.108 255.255.254.0

client-identifier 0100.23ae.015f.23

lease 7

***************************

2 REPLIES
Hall of Fame Super Gold

Re: Binding MAC to IP using client-identifier

There is no alternative to your config above.

Re: Binding MAC to IP using client-identifier

DHCP option 82 will do the trick....but then you need a dedicated DHCP server.

HTH

Sam

323
Views
0
Helpful
2
Replies