block multicast on a single interface of 3560 switch?
I have a 3560 in the shop that several plc devices are connected to. Port fa/03 jumps to a third party switch for the a group of plcs and they multicast heavy. I would like to block port 3 on my 3560 to keep it from forwarding it to the rest of the network. Thought the 3560 blocked multicast by default, but apparently I am mistaken...thanks in advance
Re: block multicast on a single interface of 3560 switch?
yes I tried it on fa0/3 and the fiber port gi0/1 still coming through Its odd there are other ports multicasting but are saying put on that switch as they should Its just the traffic from fa0/3 that i can see on wireshark
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...