Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Boot 3650 from TFTP

How can I set the switch so that it loads the startup-config file from a TFTP server. The goal is when switches are moved between locations, they will get thier config info from the local TFTP server (same IP in each location).

Thanks

1 REPLY

Re: Boot 3650 from TFTP

Hi,

Router1#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router1(config)#service config

Router1(config)#boot network tftp Network-auto 172.25.1.1

Router1(config)#boot host tftp Routers-auto 172.25.1.1

Router1(config)#end

Router1#

You need to have Network-auto and Routers-auto files [wheere you would have the configuration]in the TFTP server.

-> Sushil

340
Views
0
Helpful
1
Replies
CreatePlease to create content