Hi, I read your posting and you have the server connected to a port on vlan 100? can you ping the tftp server IP? the command copy tftp: flash: then follow the prompts, make sure your IP address of the remote server is correct, the TFTP program is started on the server and the file name is entered correct. Use the verify flash command after you download the image, and you can use the boot system flash: when you reload the device. Read through the document below it has great information on loading IOS from several sources. HTH
Think he was talking about booting from a tftp server instead of downloading a image . You could try this , this is not really a common practice of taking the boot image froma server you normally just boot the image out of flash.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.