Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Boot time increases after CatOS to IOS conversion

I converted two of my new 6509's from CatOS to IOS today and now when I reload the switch it takes around 9 minutes to boot completely. During the boot process it hangs on "Initializing ATA monitor library" for about 4 minutes.

s3223-adventerprisek9_wan-mz.122-18.SXF7.bin

Sup 32

2 REPLIES
Purple

Re: Boot time increases after CatOS to IOS conversion

Yup thats normal , take a look at the sizes of the images now they are 3 times the size they used to be . The only way I know to shorten it is to turn off complete diagnostics while it is loading which probably isn't a great idea .

New Member

Re: Boot time increases after CatOS to IOS conversion

Ouch! Thank you for your reply. I am running the modular IOS "s3223-adventerprisek9_wan-vz.122-18.SXF7.bin" so hopefully upgrades will not requirement complete reloads. Thanks again.

149
Views
0
Helpful
2
Replies
CreatePlease to create content