Hi,
One of my 6500 is refusing to boot with it's new software image.
DKNCORA#sh boot
BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin,12;sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF10.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
I want to upgrade from SXF10 to SXF14.
here's the reload output
Jul 15 08:09:01: %SYS-SP-5-RELOAD: Reload requested
Jul 15 08:09:01: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
Jul 15 08:09:01: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
System Bo otstrap, Version 8.1(3)
Copyright (c) 19 94-20 04 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot bootflash:"
Loading image, please wait ...
Self extracting the image... [OK]
Self decompressing the image : ##################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 08:39 by kellythw
Image text-base: 0x40101040, data-base: 0x41473450
Any idea ?
